How do I adjust the brakes on my Veloped/Walker?

To ensure that you can use your Veloped/Walker safely, with time you need to adjust the brakes as they get worn. Adjusting the brakes requires an 8mm spanner.

Just follow these simple steps: 

Step 1. Start by detaching the rear wheel.

Step 2. Where the brake cable enters the brake, screw the adjustment screw counter-clockwise (outwards) to tighten the brake, and screw the adjuster screw clockwise (inwards) to loosen the brake. This requires an 8mm open spanner.

Step 3.Attach the wheel and test the brake function to ensure that you can both engage the motion brake and also the parking brake.