How to replace the brake lever on a Trionic rollator?

You can replace a worn brake lever on a Trionic Walker or Veloped yourself in a few minutes with basic tools: take off the handle grip and the rear wheel, unbolt the old lever, unhook the brake cable, then fit the new lever and reassemble in reverse order. The full steps are below.

To replace the brake lever:

1. Loosen the rear screw of the handle and pull the handle off the handle tube.
2. Loosen the brake lever bolt (one turn) and pull it off the grip tube.
3. Remove the rear wheel.
4. The slots in the brake lever body, the adjuster screw and the nuts must all be lined up. When the slots are in line, you can pull the brake cable out to unhook it from the brake lever (keep the brake housing straight).
5. To mount the new brake lever, as above but in reverse.