Walker cane holder – assembly instructions

Trionic Walker Backrest – Assembly Instruction

2-piece cane holder that is attached to the handle and the frame of the Walker. The upper part has a smart quick-lock function, and the cane can quickly be attached and removed. Fits the rollators Walker 9er, 12er and, 14er.

Needed tools: Allan key (size 4 mm), Phillips screwdriver and Nippers



Turn the upper holder so that the logotype is facing upwards. 1 Turn the upper holder so that the logotype is facing upwards.

Snap the holder onto the upper part of the hand grip tube. 2 Snap the holder onto the upper part of the hand grip tube.

Snap the holder onto the upper part of the hand grip tube and then screw it in place with a Phillips screwdriver.

If you attach the both Cane Holder and the Backrest 3 If you attach the both Cane Holder and the Backrest

Note: Adjust the position of the brake lever so that there is room for the upper cane holder next to the backrest. It might be necessary to tilt the cane holder outwards, approximately 30 degrees, to fit the cane holder and the backrest on the Walker.

Attach the lower holder to the frame 4 Attach the lower holder to the frame

For right-/left-hand side assembly, turn the lower holder so you can reach the screw from the outside of the frame. To attach the lower holder to the frame, wrap the strap around the frame tube and push it into the hole of the holder.

Tighten the screw/strap 5 Tighten the screw/strap

Tighten the screw/strap by using a 4 mm Allen key.

Cut the excessive length of the strap 6 Cut the excessive length of the strap

Cut the excessive length of the strap with a cable cutter.

Ready for use 7 Ready for use

Product Reviews    

  • Excellent customer service…

    I messed up the thread for the clamping screw on the brake lever. Customer service helped me in a very friendly and reliable manner. After a few days I received a replacement screw, but unfortunately the thread in the hole of the lever was worn out.

  • The best invention after the wheel…

    My husband had a very serious accident at work: he fell from a height of eight meters on concrete floor. He is still very young, and it would be a disaster to get him to walk with a typical walker. Firstly, it is unsafe and completely unergonomic, an…

  • Trionic Veloped Hunter…

    Very excellent service, highly recommended; the company is very accommodating. The Veloped is great!!!!…

  • Great product, great service.…

    As always with Trionic, I had great response to an inquiry about a replacement part for my Trionic rollator. I got a prompt response to my inquiry, quick identification of the part needed and immediate delivery. Great company, great products.…

  • It has been a couple of months now since I first got my Veloped Trek.…

    After a few weeks of use, my foot no longer hits the front wheel and the problem I had with navigating the unit in tight corners in the climbing mode has ceased. I suppose it was simply a matter of accustoming myself to the unit that resolved these m…

  • Vivien…

    The Veloped Trek has enabled me to visit the beach regularly- something I hadn’t been able to do for a long time. I have also been to an outdoor festival and was able to travel around the fields to see the stalls and the bands in the music tents. T…

    Veloped Trek 12er M navy/black/yellow
    by Vivien Morgan-Larcher
  • A great walking aid…

    The Veloped arrived well packed and in perfect condition within a very short time. It was super easy to set it up for use: it was ready in 5 minutes!
    My husband loves it and uses it every time he walks. Since then, he has been able to walk twice the…

  • Grateful Thanks.…

    My husband has osteoporosis of the spine. Purchasing the Trionic Veloped has made a wonderful difference to both our lives. My husband can now step out and walk in a much more upright position. I no longer have the anxiety that he may fall, or that w…

  • Excellent customer service…

    On the rare occasions I have had to contact this company they have been so helpful. Advising me how to remove parts etc. Their customer service really is 100 per cent.…

Subscribe to our newsletter!