How do I determine the right grip height of my rollator?

Setting the right height of your rollator should be one of the first things to consider before you start using the rollator. It is important to adjust the handles correctly to ensure good posture while walking.

You can determine the correct grip height by doing as follows, as recommended by all physiotherapists and all rollator manufacturers:

1. Stand upright next to your Veloped, with your back as straight as possible, with your shoes on and with your arms hanging in a relaxed state along your body (elbow slightly bent).
2. Measure the vertical distance from the floor to your wrist bone = recommended grip height.
   
   

With the grips at wrist height, as strongly recommended:

1. You do not have to raise your shoulders, and you can unload a greater part of your body weight.
2. You can walk closer to the handgrips, which results in a more upright body posture.
3. The weight you put on the grips is distributed vertically/downwards = better weight distribution = good stability = better brake performance when walking downhill on the loose ground (the tires do not slide when braking).

Are the rollator grips set too high or too low?

Handles that are too high are not comfortable while walking as it requires more strength to support yourself, and can also cause neck pain. It can also cause you to walk too far away from the rollator and therefore not provide you with the needed walking support.

Handles are too low, this may cause you to walk bent over behind the rollator leaning onto the grips with an incorrect posture. The posture causes a lot of stress on the neck, shoulders and back. Long-time usage may cause severe pain.