Thank you for choosing the 200 Lumen Trionic LED Front Light.
This manual both shows how you attach the LED light on a Walker (left column below) and also how you attach it on a Veloped (right column below).
In the left-hand photo, A shows the holder attachment parts for a Walker (2 screws + 2 washers). B shows the holder attachment parts for a Veloped (1 screw + 1 knurled nut + 1 nut).
Attaching the Light Holder
Instructions for a Walker
A1. Of the two rubber straps included,choose the one with a 10-degree angled light attachment section.
A2. Push the light into the slot of the strap until it snaps in place.
A3. Attach the light to the Walker, either on the semi-vertical frame tube just below the height adjustment quick-release lever, or on the black semi-vertical grip tube.
A4. Pull the strap tight and fix it with the plastic hook.
Instructions for a Veloped
A1. Of the two rubber straps included, choose the one with a 0-degree angled light attachment section.
B2. Push the light into the slot of the strap until it snaps in place.
B3. Attach the light to the Veloped, preferably the right or left of the hinge on the U-shaped grip bar. Pull the strap tight and fix it with the plastic hook.
B4. Pull the strap tight and fix it with the plastic hook.
